How to Build a Dog House
A Wind proof doghouseKeeping "mans best friend" clean and dry in a proper dog house has always been a challenge,  here we teach you How to you build a dog house step by step. This doghouse is designed with a dividing wall which shelters your dog from the wind and rain, and the shingled roof is removable making cleaning easier. If you're in a colder climate we recommend installing a sheet of thermal-ply insulation, on the floor and walls for added warmth. These doghouse plans are very easy to follow and with a little math you can make them fit any size you need. The measurements for this dog house are meant for medium to large dogs, but feel free to customize it for your personal use. Construction details of how to build a dog house:Type: Doghouse
Complete size: 48L x 40W x 44H in
Material: Exterior plywood, roofing material
Woodwork: Fastened with glue and screws
Roof materials
*Gussets under the roof strength it, allowing it to be removable.
*15 lb building paper and shingles are used to seal of the roof from bad weather Finish: Exterior finish and paint
Duration: 8-10 hours Shopping list
(3) ¾ in. x 4 ft x 8 ft exterior plywood
(1) ¾ in x 4 ft x 4 ft exterior plywood
2-in deck screws
Moisture resistant wood-glue
15-pound building paper
Standard grain sand paper
Asphalt shingles
Roofing nails
Galvanized staples
Roofing nails
Finishing materials (exterior primer and paint) Dog House Plans & Measurements | 
